Brakes really aren’t optional equipment. And taking care of them isn’t optional either.
A regular brake inspection is on every car’s maintenance schedule. An inspection will check your brake system and let you know if there are any problems. Of course, if you’re having trouble with your brakes, get your car into a White Marsh or Dundalk service center right away. And watch out for these problems:
Low or spongy brake pedal
Hard brake pedal
A brake warning light that stays on
Constantly squealing or grinding brakes
Vibrations or clunking sounds when you apply your brakes
There are two types of brakes: disc and drum. Disc brakes have a rotor that’s attached to the axle. Calipers straddle the rotor, kind of like the brakes on a bicycle. Drum brakes are more common on back wheels. Pads, called shoes, push against the inside of the drum to slow the vehicle.
There are several things that need to be serviced on the brake system. First, the brake pads and shoes wear out with use, and become too thin to really help. If the brake pads wear away completely you can damage the rotors. The calipers can grind grooves in the rotor. Then the rotor must either be resurfaced or replaced and that can be expensive. But putting it off is dangerous because your vehicle won’t stop as quickly. Sometimes rotors warp or crack and must be replaced.
Brake fluid is also important. When the brakes are applied, the pressure in the fluid activates the brake pads or shoes. Not enough fluid, not enough pressure to brake properly. Also, water builds up in the brake fluid over time, which leads to corrosion, leaks and brake damage, and with hard use, the brakes could severely fade or even fail. You should change the brake fluid when your manufacturer recommends it.
There are different grades of brake pads. There are regular, metallic and ceramic – higher grades cost more, but give better braking performance and smoother operation. It’s OK to upgrade your brake pads. But, never use a grade that’s lower than what the manufacturer recommends.
Be sure to properly maintain your brakes because it’s a lot cheaper than paying your nearest Baltimore area body shop after an accident.
So, when are your tires actually worn out? This is a question a lot of us in White Marsh MD ask ourselves. For many, the answer is ‘when they no longer pass a safety inspection’. But waiting that long can have a serious impact on your safety.
The U.S. Federal government doesn’t have any laws for tread depth, but 42 of the states, and all of Canada, do have regulations. They consider two-thirty-seconds of an inch to be the minimum legal tread depth. Two other states, including California, consider one-thirty-second to be the minimum and six states have no standards at all. Call us at Quicklane Tire & Auto Center @ Al Packer White Marsh (just call (443) 777-5050) to find out what your requirements are in the White Marsh MD area.
Since 1968, U.S. law has required that a raised bar be molded across all tires. When tires are worn enough that this bar becomes visible, there’s just 2/32” of tread left. But does that older standard give you enough safety?
Well, Consumer Reports issued a call to consider replacing tires when tread reaches 4/32”. And the recommendation is backed by some very compelling studies. Now before we go into the studies, you need to know that the big issue is braking on wet surfaces.
We tend to think of the brakes doing all the stopping, but you also need to have effective tires to actually stop the car. When it’s wet or snowy in White Marsh MD, the tread of the tire is critical to stopping power.
Picture this: you’re driving over a water-covered stretch of road. Your tires actually need to be in contact with the road in order to stop. That means the tire has to channel the water away so the tire is actually contacting the road and not floating on a thin film of water – a condition known as hydroplaning. When there’s not enough tread depth on a tire, it can’t move the water out of the way and you start to hydroplane.
This is where the studies come in. We think you’ll be surprised. A section of a test track was flooded with a thin layer of water. If you laid a dime flat on the track, the water would be deep enough to surround the coin, but not enough to cover it.
A car and a full-sized pick-up truck were brought up to 70 mph and then made a hard stop in the wet test area. Stopping distance and time were measured for three different tire depths. First, they tested new tires. Then tires worn to legal limits. And finally, tires with 4/32” of tread were tested – this is the depth suggested by Consumer Reports
When the car with the legally worn tires had braked for the distance required to stop the car with new tires, it was still going 55 mph. The stopping distance was nearly doubled. That means if you barely have room to stop with new tires, then you would hit the car in front of you at 55 mph with the worn tires.
Now with the partially worn tires – at the depth recommended by Consumer Reports – the car was still going at 45 mph at the point where new tires brought the car to a halt. That’s a big improvement – you can see why Consumer Reports and others are calling for a new standard.
Now without going into all the details, let us tell you that stopping the truck with worn tires needed almost 1/10 of a mile of clear road ahead to come to a safe stop. Obviously this is really a big safety issue.
The tests were conducted with the same vehicles, but with different sets of tires. The brakes were the same, so the only variable, was the tires.
So, how do you know when your tires are at 4/32”? Well, it’s pretty easy. Just insert a quarter into the tread. Put it in upside down. If the tread doesn’t cover George Washington’s hairline, it’s time to replace your tires. With a Canadian quarter, the tread should cover the numbers in the year stamp.
Now you may remember doing that with pennies. But a penny gives you 2/32” of an inch to Abraham Lincoln’s head. The quarter is the new standard – 4/32”.
Tires are a big ticket item and most people in White Marsh MD want to get the most wear out of them that they can. But do you want that much more risk just to run your tires until they are legally worn out? For us, and we would guess for many, the answer is “no”.
Well, Mr. Washington, let’s go out and look at my tires.
New cars cost so much these days. Add financing and insurance and, well a new vehicle may not seem so attractive. A lot of White Marsh, MD people are hoping to make their cars last a lot longer.
The good news is that with the current state of automotive engineering and manufacture, there’s no reason a modern vehicle can’t be made to last for a 150,000 miles or more.
There is an old saying that says, ‘a stitch in time saves nine’ and that is really true when it comes to taking care of your car. A great example is coolant service.
Over time, coolant becomes corrosive and actually starts to damage your radiator and other parts. That’s why you need to have your cooling system serviced on a regular schedule.
The same is true for your power steering system, brake fluid, air conditioning system, differential and transmission. And your oil changes should be done right on schedule to avoid the build up of harmful oil sludge.
Don’t let your brake pads go too long before they are worn to the point that they cause damage to rotors. Preventive maintenance is a great way to keep your operating costs down.
Now this is a lot to remember. Quicklane Tire & Auto Center @ Al Packer White Marsh can keep on top of this stuff. We can tell you what your manufacturer recommends and help you with a plan to take care of it.
Bottom line – take care of this stuff on schedule and you will reduce operating costs, prevent costly damage and maintain your warranty coverage. Call Quicklane Tire & Auto Center @ Al Packer White Marsh today for an appointment; you can reach us at (443) 777-5050.
Take good care of your car, and it’ll take good care of you.
Quicklane Tire & Auto Center @ Al Packer White Marsh Give us a call today at (443) 777-5050. Or stop by at 9801 Pulaski Highway, White Marsh, MD 21220
Today we want to talk about a very important system in our cars – the cooling system. It’s one of those things that you don’t give much thought to until it fails and then you’re stranded by the side of the road.
Cooling systems fail more often than any other mechanical system – usually because of neglect. Don’t you hate it when something breaks, and you could have done something to prevent it?
The good news is that if you take care of your cooling system it can keep working for the life of your car.
Here at AutoNetTV, we emphasize preventive maintenance services like replacing your coolant according to the factory schedule. But the various parts that make up the cooling system need attention too. The major components of the cooling system are the water pump, freeze plugs, the thermostat, the radiator, cooling fans, the heater core, the pressure cap, the overflow tank and the hoses.
It sounds complicated, but we don’t have to be experts – we can leave that to our Friendly service technicians at Quicklane Tire & Auto Center @ Al Packer White Marsh. But, having an overview will help us remember to take care of our cooling systems.
Most people would be surprised to know that burning fuel in your engine produces up to 4,500 degrees of heat. And all that heat has to be dealt with. If the heat can’t be drawn off the engine, the pistons will literally weld themselves to the inside of the cylinders – then you just have to throw the engine away and get a new one. That would cost thousands of dollars.
Now the water pump is what forces the coolant through passages in the engine to absorb heat. The pump is driven by a belt that needs replacement from time to time. And the water pump will eventually wear out and need to be replaced. Spending some money on replacing the belts and water pump is much less than the cost of repairing the massive damage that can be done when an engine seizes.
There’s another little part of the coolant system that protects the engine. It’s called a freeze plug. If you remember from high school chemistry, water expands when it freezes. In very cold areas, the coolant can actually freeze when the vehicle is left sitting.
It is hard to believe, but the expanding frozen coolant can actually crack the engine block. The freeze plugs fit into the engine block. They fit tight enough to withstand the pressure of a running engine, but can expand or pop out if the coolant freezes. These little things save a lot of engine blocks.
That brings up a good point. An engine has to work in all kinds of temperatures – extremely hot as well as very cold. How does the cooling system adapt to external temperatures as well as varying operating conditions?
Well, it’s much like the way you keep your house at a comfortable temperature all year round – with a thermostat. The thermostat in your car controls how much coolant flows through your engine. When the engine is cold, it restricts coolant flow until the engine comes up to an efficient operating temperature. Then it starts opening up to move more coolant to keep the temperature within a specified range.
The thermostat needs to be replaced from time to time as well. It’s easy to diagnose a failed thermostat and is fairly inexpensive to replace. We can do this for you at Quicklane Tire & Auto Center @ Al Packer White Marsh in White Marsh, just give us a call: (443) 777-5050. Now we’ve been talking about all this heat we’ve got to get rid of, but haven’t really talked about where it goes. That’s where the radiator comes in. The hot coolant passes through the radiator. Air flows past the cooling fins and cools the coolant.
The radiator has two tanks that hold coolant: sometimes one the top and bottom or one on either side. If you have an automatic transmission, one of the tanks will also contain a second tank that cools the transmission fluid. Large SUV’s and trucks often have a separate transmission cooler. So when you drive around White Marsh, the air is forced past the radiator. But driving doesn’t produce enough air flow. So the radiator has cooling fans that force fresh air over the radiator. These fans may be powered by a belt or by electric motors.
Now, you also have something called a heater core. The heater core is like a mini radiator. A small fan blows air over the heater core and into the passenger compartment of your vehicle. That’s how you warm your car when it’s cold out.
Next is the radiator cap. With most newer cars around White Marsh, you never remove the radiator cap, except to replace it. You add coolant through the overflow tank. The radiator cap is also called a pressure cap, because its job is to maintain pressure in the cooling system.
High pressure raises the boiling point of the coolant, so it cools more effectively even in very demanding conditions. That is why you need to replace the cap from time to time. They recommend changing it out every time you replace your coolant.
Coming back to the overflow tank, it is needed because when the coolant gets hot it expands and the overflow holds the extra volume. The tank helps maintain the proper level of coolant and keeps air out of the system. You should never open the radiator cap or over flow tank when the engine is hot. This could lead to serious burns.
What else do we need to do to keep our cooling systems working well? Well, there are the hoses that hook all of these pieces together. They’re obviously very tough to deal with the pressure and high temperatures. But they do get worn. Sometimes they get spongy from the heat. Sometimes they lose their connection to the radiator, water pump, etc. It’s a great idea to have your White Marsh service center inspect your hoses at least once a year and replace them, if needed, before they break.
Quicklane Tire & Auto Center @ Al Packer White Marsh can help you check your cooling system and make any necessary adjustments or repairs. Give us a call at (443) 777-5050.
If you aren’t currently using synthetic motor oil in your White Marsh vehicle, maybe now’s the time to consider it. Need more information? Well, synthetic motor oil is a substitute for petroleum based oil.
Synthetic oil doesn’t gel or gum-up like petroleum based oil and it doesn’t vaporize as easily. It protects better in severe driving conditions like stop and go driving around White Marsh, as well as in very hot or very cold conditions. More and more new vehicles are being delivered with full synthetic motor oil; with the recommendation to use synthetic for the life of the vehicle.
Why is this? Synthetic motor oil maximizes engine power and fuel economy. To see why; we’d need a microscope, so we’ll have to settle for using our imaginations.
The molecules of conventional motor oil are long hydrocarbon chains. Synthetic motor oil, on the other hand, has uniform, round molecules. Which is more slippery, a pile of pencils or a pile of marbles?
Synthetic motor oil lubricates better because there’s less friction. That means better wear protection, cooler operating temperatures, more power and better fuel economy. And synthetic oil doesn’t sludge up like conventional oil, so it prevents those small oil passages from clogging up.
Some manufacturers are extending oil change intervals. The added protection of synthetic oil covers you for these longer intervals. Talk with your service advisor about how you drive and see if he thinks you can benefit from synthetic oil. Also ask about the appropriate oil change interval for synthetic, because it may very well be longer than for conventional oil.
Most of us here in White Marsh have a busy life and might occasionally miss an oil change; go ahead admit it. Since we’re not perfect, doesn’t it make sense to use a motor oil that’s got your back?
Now synthetic oil costs more. But it lasts longer, protects better and increases fuel economy. You’ll likely save money in the long run. If you’re serious about making your car last longer, start using synthetic motor oil right away.
The price of gas has got everyone talking. It seems that people who need a bigger vehicle to carry family and gear, or provide four wheel drive, are especially hit hard. That is why we thought it would be good to review some things that anyone can do to improve fuel economy.
First let’s start with how we drive. People may not realize that they can really save on gas by just changing a few driving habits. One of the biggest is jackrabbit starts – you know, flooring the gas as soon as the light turns green. That really wastes a lot of fuel. Building up your speed at a slower pace uses less fuel and is easier on your engine and drive train. And don’t drive with one foot on the brake. That’s also a drag on fuel economy, and it wears out your brakes faster too.
Another thing is to drive slower – but only when it’s safe. Sometimes on the highway we drive an extra five … ten . . . twenty … over the speed limit. We do it to save time, but it only saves a few minutes out of maybe an hour long drive, and we may use 10 to 15 % more gas. Just leave a little bit earlier, save some money and arrive more relaxed.
You can also try and group all of your errands for the day into just one trip, rather than several. If you can put off a trip today that can be combined with one tomorrow – you can save some time and money.
Using your cruise control can save money too. Driving at a constant speed really improves fuel economy. Be sure to only use your cruise control under safe conditions – you can look in your owner’s manual for some good tips on using your cruise control.
Did you know that reducing the weight in your vehicle saves gas? Clean out the trunk or back seat from time to time so that you are not paying to carry around a lot of stuff you do not need in the car. If you live where there is snow and ice, clear it off your car. They add weight and mess with aerodynamics too.
Another tip is to avoid long idle times, which includes warming it up when you start. Modern engines do not require a long warm up to get going – just take it easy for a couple of miles.
Be sure to get a new gas cap if yours leaks or is worn.
Now, let’s start talking mechanical. Bottom line – the better you maintain your vehicle, the less fuel you will use. It all adds up in a big way. For example, replacing your dirty engine air filter will pay for itself in fuel savings before your next oil change – and will keep saving you money after that.
A clean, well-maintained fuel system really pays big dividends. A clogged fuel filter wastes gas. So does a dirty fuel system, grimy fuel injectors and plugged up PCV valves. A fuel system service decreases the gas you use, and increases the power – so you can’t go wrong with that.
Some of us ignore our Check Engine light. But fixing the problem that caused the light to come on will usually save some fuel as well. It may be a bad oxygen sensor that can really rob your fuel economy.
And, it may be time for a tune-up. Tune-ups should improve your fuel economy. Don’t overlook the routine maintenance items, like scheduled oil changes, transmission and cooling system service. Dirty or low fluids actually use more fuel. Just look at your manufacturer’s recommended service intervals in the owner’s manual, or ask your Quicklane Tire & Auto Center @ Al Packer White Marsh service advisor for the schedule.
Don’t forget your tires. Underinflated tires waste gas. And if your wheels are out of alignment you won’t get the economy you need.
None of these things are very complicated or expensive to stay on top of. When you maintain your car properly, you save gas today, and prevent costly repairs tomorrow.
Wheel alignment is often overlooked by busy Essex and Middle River car owners until serious tire damage has been done. One wheel can be knocked out of alignment from the rest by hitting a curb or pothole on Baltimore roads.
When a vehicle’s out of alignment, one or more of the wheels does not track true and pulls against the others. The tires will wear out very quickly and will need to be replaced prematurely. It could also lead to Ford suspension damage.
But the big issue for Essex, Middle River, and White Marsh motorists is safety. When your Ford wheels are out of alignment, the vehicle will pull to one side, which could lead to an accident. When you’re out of alignment, you should have it taken care of right away at Quicklane Tire & Auto Center @ Al Packer White Marsh in White Marsh.
At Quicklane Tire & Auto Center @ Al Packer White Marsh, your vehicle is put on an alignment rack where the tires, steering and suspension parts are checked for damage. Then the alignment is charted and checked against the factory settings.
Adjustments are made to bring the wheels back into alignment. This gets all four wheels going in precisely the same direction.
Signs of alignment problems are: Your car pulls to one side. Also, your steering wheel may not be centered when you’re going straight. If you see the edges of one or more tires rapidly wearing down, you should have your Baltimore service center look it over. If you’ve been in an auto accident in MD that involved a wheel, you should get your alignment checked.
A big jolt can seriously knock things out of alignment, but Essex drivers also need to understand that a series of smaller ones can add up.
That’s why your manufacturer recommends periodic alignment checks. If your Ford owner’s manual doesn’t specify, once a year might be appropriate. Or check with Bill Crumley or your service advisor at Quicklane Tire & Auto Center @ Al Packer White Marsh in White Marsh.
One thing’s for sure: the cost of the alignment at Quicklane Tire & Auto Center @ Al Packer White Marsh is cheaper than having to buy a couple of new tires because of neglect.
We’ve all seen people do crazy things while driving to or from Baltimore. A guy shaving in the rear-view mirror, a woman applying makeup, people talking on their phones, texting or drinking from an enormous coffee mug. All of these are an accident waiting to happen.
The truth is everyone in Baltimore MD is distracted when we drive. Traffic, road construction and other things outside the car are beyond our control. But the distractions inside our car are things we can often control.
Here’s some things that’ll give you more control in your car, and help keep your attention on the roads around Baltimore MD.
Drivers who are 16 to 20 years old tend to be more distracted by the radio, CD or MP3 player.
Drivers who are 20 to 29 are more distracted by passengers in the car, including small children.
And those over age 65 tend to be more distracted by objects or events that are outside of the vehicle.
Other factors like fatigue, stress and lack of sleep make it harder to pay attention to driving – no matter what age we are. People are also distracted by thinking about relationships, family issues, money and bills. So what can we do to manage these distractions? Well, the first thing is to eliminate as many as we can.
When you get in your car, make sure you’re belted in; that the seats, steering wheel and mirrors are adjusted; and your radio or CD player is ready.
Secure any loose objects in the car that can fall on the floor and interfere with your driving.
If you have a drink, make sure it’s spill-proof and put in a cup holder. Pets should also be contained.
If you’re riding with kids, make sure they’re wearing seat belts or secured in safety seats. You may want to give em some distractions to keep them quiet and sitting in their seats. Don’t get involved in their arguments while you’re driving. Pull over if you need to find a toy or break up a fight.
If you eat while driving, keep it to simple finger foods that aren’t messy.
Learning your car’s controls before you drive is another way to improve your safety. Know how to work the radio by touch. The same goes for heating and air conditioning controls.
If you have to use a cell phone, a hands-free system is best. But remember, the biggest cell phone distraction isn’t the phone itself – it’s the conversation. Keep conversations brief and light, or pull over if you can. Your reaction time is much slower when talking and driving, so allow more space between you and the car ahead of you. Know your local laws – it may be illegal to be on the phone or text in the Baltimore MD area.
And if you really think you have to shave, change your clothes or put on make-up while driving – you’re wrong. Just start getting ready earlier so you have enough time to finish those things before you drive into Baltimore MD.
Remember, driving is probably the most dangerous thing you’ll do all day – so don’t make it any worse. Use these tips to keep you and your loved ones safer behind the wheel.
All modern vehicles come with fuel injection systems, so it’s a topic we all need to know something about. All new cars and trucks sold in White Marsh, MD over the last 30 years or so have come with fuel injection systems.
The fuel injector is a valve that delivers the gas or diesel fuel to the right place, in the right amount, at the right time; to be mixed with air and burned in the engine.
So how many fuel injectors does your car have? There’s one for each cylinder. So four, six or eight for most folks in White Marsh, MD. Some vehicles have 10 or 12 cylinders. The engine control computer makes adjustments to the fuel injector as it monitors the engine and other sensors. Fuel injectors are a pretty sophisticated part.
Quicklane Tire & Auto Center @ Al Packer White Marsh can help you with a fuel injector cleaning service. What’s the benefit? In order to work right, the fuel injectors have to deliver the fuel at a precise pressure at a very precise time. The fuel needs to be sprayed in a particular pattern as determined by the engine design.
Over time, varnish can start to build up in the fuel injectors, effecting the pressure, pattern and timing of the fuel charge. The result is that the fuel doesn’t get burned as efficiently as it could. That robs performance and wastes fuel.
What about dirty fuel – how does that affect the fuel injectors? The fuel injectors are the last stop in the fuel system. It starts at the fuel tank. Frankly, the best way to keep your fuel injectors working well is to use high quality fuel. Its real tempting to shop for bargains with fuel prices as high as they are, but major brands in the White Marsh, MD area have better detergents and additives and deliver consistent quality.
What about a good fuel filter? The fuel filter is the next device in the fuel system. Its job is to filter out the dirt and rust that collect in the fuel tank. If it’s clogged up, the dirt will bypass the filter and head upstream to the fuel injectors.
It’s important to replace the fuel filter when your manufacturer recommends it. That’s part of a comprehensive fuel system cleaning.
There are different kinds of fuel injection systems. Port fuel injection systems, the kind most gasoline engines have, operate at 60 pounds per square inch. The injectors for the new gas direct injection engines we’re starting to see require 10 to 30 times as much pressure. And some diesel engines for passenger vehicles have injectors that operate at 30,000 pounds or more per square inch. There’s no room for dirt and gum in a precision part like that.
There are a lot of good products available in White Marsh, MD that can clean fuel injectors. They’re best used to prevent fouling in the fuel injectors. Many can’t clean a seriously gummed up injector – that requires a professional deep cleaning. But putting the cleaner in the fuel tank after you’ve had Quicklane Tire & Auto Center @ Al Packer White Marsh take a look at your fuel system will help keep it clean. Be sure to read the label for directions.
Give us a call if you think your Ford may be ready for a fuel injector cleaning.
One of the most popular vehicle modifications in MD is custom wheels and tires. Custom wheels help you stand out from the crowd without spending a lot of money, and custom tires can help you fine tune your performance. Not that long ago, new cars came with just one or two tire and wheel options. Now manufacturers are offering more choices and over a third of new vehicle buyers choose custom wheels. That seems to have fueled public demand for custom wheels in all vehicle categories. The available styles, colors and finishes are endless. You’re sure to get the look you want – from sleek and stylish to tough and aggressive.
While custom wheels are largely a matter of taste, custom tires are a matter of function. That is not to say that there are not a lot of cool looking tires out there, it’s just that tires are vital to your safety, so there are some important practical considerations. Let’s look at it in terms of extremes. Think about the environment on a dry race track. High heat, high speed, high cornering forces, hard braking. Then think about a snowy, icy winter that is very cold and slippery. The rubber compound that could withstand the high temperatures and cornering forces on the race track would be very stiff and inflexible in winter conditions. And the rubber compound that provides cold weather flexibility and good bite into ice and snow would rapidly wear out on the race track and wouldn’t be stable at high speeds. Of course the tread design would be greatly different for maintaining traction on a dry race track than it would be for cutting through deep snow.
No one expects any one tire to handle these extremes. So, what we need to do is think about how we drive in MD and talk to a tire professional about options. There is a tire out there that will meet your driving needs. When you boil it down to the basics, a tire provides traction. The traction is for accelerating, cornering, and for stopping. Once you can identify the conditions you expect to drive in, you can find the tire that will deliver the traction you need.
Tire design and formulation has become very sophisticated. There are fewer compromises in wear, comfort, and performance. You can definitely find a tire that will deliver satisfaction over a range of driving conditions. Now if you live where a tire meeting the severe snow standard is advised, you’ll want to have a set of winter tires during those snowy, icy months.
Let’s go over tire and wheel size. Installing wheels and tires that are the same size as standard is easy. However, many people want to upsize these days and that can get a bit tricky. With the help of your Baltimore tire professional, you will be able to pick the right tire and wheel combination for the way you drive. For example, if you drive in MD off-road areas a lot, a low profile tire might not work because there is just not enough cushion for the bumps and rocks.
You’ll want some help to make sure your new tires and wheels fit without rubbing. Your White Marsh tire pro can also help you know if your engine management computer needs to be reprogrammed so that your speedometer is properly calibrated. A lot of people are tempted to order tires and wheels online but do not realize that some safety systems may be affected. For example, your rolling diameter needs to be within 3% of factory specifications in order for your anti-lock brakes to work properly. Traction and stability control systems can also be adversely affected.
It pays to get professional help when deciding on a wheel size. There has never been a better time to get custom wheels for the look you want. And your tire options are phenomenal. Whether you want a single purpose winter or summer performance tire – or something that can handle a wider range of conditions, you have a tire option for every price range.
