Quicklane Tire & Auto

What type of technology do you use? Do you prefer an 8-track tape or an iPod? When it comes to winter tires, much of the public’s perception dates back to when 8-track was the best way to listen to the Bee Gees.

Twenty years ago, winter tires differed from highway tires only in their tread design. We called them snow tires back then and they had big, knobby lugs that were designed to give good traction in deep snow. They had the same rubber compound as regular tires and they weren’t very good on ice, packed snow or wet roads. They were not even very good on dry roads. They really helped in deep or loose snow, but they did a poor job the rest of the time. They were loud and rode hard. You couldn’t wait to get them off in the spring.

Then all-season tires started to come along. All-season tires are really a compromise between summer and winter performance. They have acceptable hot weather ride and tread life, and you can get through mild winter road conditions OK. But there are some really good reasons to consider winter tires.

Modern winter tires do a terrific job in a wide range of winter conditions. First of all, below 45 degrees Fahrenheit, regular tires become hard and inflexible. That means they don’t provide the road grip you need. Even if you don’t live somewhere with a lot of snow, but it still gets below 45 degrees in the winter, you will be safer with winter tires.

In addition, they are specifically designed to more effectively move snow and water. That’s the key to traction on ice, packed snow and wet roads. They use a micro-pore compound that allows the tire to bite into ice and snow. They also use wider grooves that run around the circumference of the tread to expel snow from the tire better. The lugs and grooves on winter tires have a special shape that throws the packed snow out of the tread as the tire turns. The tread is then open when it comes back in contact with the road and can provide good traction.

Winter tires also have a lot of sipes. Sipes are thin slits in the tread. The edge of the sipes grab ice and packed snow to provide tons of traction and to expel water and slush out of the tread. winter tires have a rounder casing to cut into the snow’s surface. The treads on regular summer tires can actually get packed with snow instead and become very slick. winter tires offer 25% to 50% more traction than all-season tires. And when it comes to stopping power, all-season tires take 42% longer to stop than winter tires. Sometimes that’s the difference between getting home safely and spending the night in a snow bank.

Now back when the 8-track was king, you just put snow tires on the drive wheels. That worked out OK because the rubber compound was essentially the same. Now, winter tires provide so much more traction than all-season or summer tires, that there’s a huge difference between the traction at the front and rear ends of the car if you only put winter tires on the drive wheels.

For example: if you take a corner on an icy road and the rear end starts to slide out, essentially the rear is trying to pass the front because it’s going faster. If you have high traction winter tires only on the front, they are going to be much more effective at transferring cornering grip and stopping power to the front wheels. This will actually cause the rear end to whip out even more.

That’s why tire manufactures instruct their dealers that they must install winter tires on the rear wheels as well whenever they put winter tires on the front end of any vehicle. It’s a major safety concern. It’s strongly recommended that winter tires be installed on all four wheels on rear wheel drive vehicles as well. The front tires do most of the steering and braking work – it only makes sense that you provide the front end with the best traction you can.

People often assume that if they have four-wheel drive or all-wheel drive they don’t need winter tires on all four wheels. Would you intentionally disconnect the four-wheel drive in poor road conditions? Of course you wouldn’t, but that’s essentially what you do if you only put winter tires on one end. It only makes sense to have the same level of traction and control at all four corners.

The province of Quebec in Canada has issued a law requiring all passenger vehicles, taxis and rental cars with Quebec license plates to install a full set of four winter tires between November 15th and April 1. It’s that important.

Many modern cars have traction control and anti-lock brakes so people may think that they don’t need winter tires. But you need traction to accelerate, steer and stop. The tires provide the traction so that the traction control and anti-lock brakes have something to work with.

Look for tires with the symbol of a mountain with a snowflake in it. This means the tire complies with the severe snow standard. All-season tires will have an M&S, for mud and snow, on the sidewall.

So when the temperatures drop below 45 degrees, be sure you have a set of four winter tires for maximum performance in snow, packed snow, ice, wet and dry roads. Your tire professional can help you find the right winter tire for your vehicle and driving needs.

Welcome to the Quicklane Tire & Auto Center @ Al Packer White Marsh blog. Today, let’s talk about the effect of tire tread depth on braking. When talking about stopping power, most of us Middle River drivers tend to focus on our brakes. But our tires are where the rubber meets the road. So having good brakes isn’t enough. Safe Middle River drivers need to have tires with enough traction to translate braking power into stopping power.

Let’s focus on stopping in wet Middle River conditions. In order for a tire to have good contact with the road, it has to move the water out of the way. If it can’t move the water, the tire will actually ride on top of a thin film of water.

That’s called hydroplaning. If it’s really bad, Middle River drivers can actually spin out of control. At best, you won’t stop as fast.

So how does a tire move water? It has channels for water to flow through. Look at your Ford tire and you’ll see channels: channels that run around the tire and channels that flow across the tire. They’re designed to direct water away from the tire so it can contact the road better.

And the deeper the channel, the more water it can move. A brand new Quicklane Tire & Auto Center @ Al Packer White Marsh tire has very deep channels and can easily move a lot of water. As the tire wears down, the channels become shallower and can move less water. When it wears down enough, it can seriously affect your ability to stop your Ford on wet Middle River roads.

So that’s why it’s so important to replace our Ford tires when they get worn. Consumer Reports and other advocate groups call for a standard of 3/32 of an inch and they have the studies to prove it.

By comparison, you’ve probably seen the wear indicator that’s molded into tires. When tires are worn 3/32 of an inch, the tread wear bar is visible. So the recommended standard has twice the tread depth as a completely worn out Ford tire.

At Quicklane Tire & Auto Center @ Al Packer White Marsh, we want our customers to know that the deeper recommended tread depth makes a big difference. Stopping distances are cut dramatically on wet Middle River roads. A safe stop from MD freeway speeds with 4/32 of an inch of tread would result in a crash with worn out tires.

There’s an easy way to tell when a tire’s worn to 4/32 of an inch. Just insert a quarter into the tread. Put it in upside down. If the tread doesn’t cover George Washington’s hairline, it’s time to replace your Ford tires. With a Canadian quarter, the tread should cover the numbers in the year stamp.

Many Middle River car owners have heard of this technique using a penny and Abe Lincoln’s head. That measure gives you 2/32 of an inch – half the suggested amount. Of course, Ford tires are a big ticket item. Most of us in Middle River want to get as many miles out of them as we can. But there’s a real safety trade-off. It’s your choice.

So you love our job, and your family life is great: You have achieved balance. But can you the same for your wheels? You can tell if your tires are out of balance by vibrations at higher speeds. If one of the front tires is out, you feel the vibration in the steering wheel. If it’s a back tire, you’ll feel the vibration in your seat.

Tires and wheels are pretty heavy. When a tire is mounted on a wheel, it is usually not perfectly balanced. So the tire technician will spin the tire on a machine to determine where it’s too heavy. He will then place weights on the wheels in strategic locations to balance it out. When a tire is out of balance, it actually bounces down the road instead of rolling smoothly. Since the average size tire rotates at about 850 revolutions per minute at 60 MPH, it is actually slamming into the pavement 14 times a second. That’s where you get your vibration.

Most people are surprised at how smoothly their car rides after balancing all four wheels.

Most high-quality tires hold their balance pretty well. They just get out of balance gradually with normal wear and tear. If you suddenly feel a vibration, it is probably because you lost a wheel balancing weight along the way. Definitely get a balance if you feel a vibration, change your rims or have a flat repaired. Putting off a needed balance job leads to excessive tire wear, wear to your shocks, struts, steering and suspension parts. wheel balancing not only improves your ride and handling, but also can save you some big repair bills and possibly an accident. Additionally, you will get better gas mileage.

Some people have their tires balanced at every rotation. Others do it every other time. Check your owners’ manual for your requirements, or ask your technician. Doing thus will put you on the path to mechanical wheel balance

.

So, when are your tires actually worn out? This is a question a lot of us in White Marsh MD ask ourselves. For many, the answer is ‘when they no longer pass a safety inspection’. But waiting that long can have a serious impact on your safety.

The U.S. Federal government doesn’t have any laws for tread depth, but 42 of the states, and all of Canada, do have regulations. They consider two-thirty-seconds of an inch to be the minimum legal tread depth. Two other states, including California, consider one-thirty-second to be the minimum and six states have no standards at all. Call us at Quicklane Tire & Auto Center @ Al Packer White Marsh (just call (443) 777-5050) to find out what your requirements are in the White Marsh MD area.

Since 1968, U.S. law has required that a raised bar be molded across all tires. When tires are worn enough that this bar becomes visible, there’s just 2/32” of tread left. But does that older standard give you enough safety?

Well, Consumer Reports issued a call to consider replacing tires when tread reaches 4/32”. And the recommendation is backed by some very compelling studies. Now before we go into the studies, you need to know that the big issue is braking on wet surfaces.

We tend to think of the brakes doing all the stopping, but you also need to have effective tires to actually stop the car. When it’s wet or snowy in White Marsh MD, the tread of the tire is critical to stopping power.

Picture this: you’re driving over a water-covered stretch of road. Your tires actually need to be in contact with the road in order to stop. That means the tire has to channel the water away so the tire is actually contacting the road and not floating on a thin film of water – a condition known as hydroplaning. When there’s not enough tread depth on a tire, it can’t move the water out of the way and you start to hydroplane.

This is where the studies come in. We think you’ll be surprised. A section of a test track was flooded with a thin layer of water. If you laid a dime flat on the track, the water would be deep enough to surround the coin, but not enough to cover it.

A car and a full-sized pick-up truck were brought up to 70 mph and then made a hard stop in the wet test area. Stopping distance and time were measured for three different tire depths. First, they tested new tires. Then tires worn to legal limits. And finally, tires with 4/32” of tread were tested – this is the depth suggested by Consumer Reports

When the car with the legally worn tires had braked for the distance required to stop the car with new tires, it was still going 55 mph. The stopping distance was nearly doubled. That means if you barely have room to stop with new tires, then you would hit the car in front of you at 55 mph with the worn tires.

Now with the partially worn tires – at the depth recommended by Consumer Reports – the car was still going at 45 mph at the point where new tires brought the car to a halt. That’s a big improvement – you can see why Consumer Reports and others are calling for a new standard.

Now without going into all the details, let us tell you that stopping the truck with worn tires needed almost 1/10 of a mile of clear road ahead to come to a safe stop. Obviously this is really a big safety issue.

The tests were conducted with the same vehicles, but with different sets of tires. The brakes were the same, so the only variable, was the tires.

So, how do you know when your tires are at 4/32”? Well, it’s pretty easy. Just insert a quarter into the tread. Put it in upside down. If the tread doesn’t cover George Washington’s hairline, it’s time to replace your tires. With a Canadian quarter, the tread should cover the numbers in the year stamp.

Now you may remember doing that with pennies. But a penny gives you 2/32” of an inch to Abraham Lincoln’s head. The quarter is the new standard – 4/32”.

Tires are a big ticket item and most people in White Marsh MD want to get the most wear out of them that they can. But do you want that much more risk just to run your tires until they are legally worn out? For us, and we would guess for many, the answer is “no”.

Well, Mr. Washington, let’s go out and look at my tires.

Quicklane Tire & Auto Center @ Al Packer White Marsh
9801 Pulaski Highway
White Marsh, MD 21220
(443) 777-5050

One of the most popular vehicle modifications in MD is custom wheels and tires. Custom wheels help you stand out from the crowd without spending a lot of money, and custom tires can help you fine tune your performance. Not that long ago, new cars came with just one or two tire and wheel options. Now manufacturers are offering more choices and over a third of new vehicle buyers choose custom wheels. That seems to have fueled public demand for custom wheels in all vehicle categories. The available styles, colors and finishes are endless. You’re sure to get the look you want – from sleek and stylish to tough and aggressive.

While custom wheels are largely a matter of taste, custom tires are a matter of function. That is not to say that there are not a lot of cool looking tires out there, it’s just that tires are vital to your safety, so there are some important practical considerations. Let’s look at it in terms of extremes. Think about the environment on a dry race track. High heat, high speed, high cornering forces, hard braking. Then think about a snowy, icy winter that is very cold and slippery. The rubber compound that could withstand the high temperatures and cornering forces on the race track would be very stiff and inflexible in winter conditions. And the rubber compound that provides cold weather flexibility and good bite into ice and snow would rapidly wear out on the race track and wouldn’t be stable at high speeds. Of course the tread design would be greatly different for maintaining traction on a dry race track than it would be for cutting through deep snow.

No one expects any one tire to handle these extremes. So, what we need to do is think about how we drive in MD and talk to a tire professional about options. There is a tire out there that will meet your driving needs. When you boil it down to the basics, a tire provides traction. The traction is for accelerating, cornering, and for stopping. Once you can identify the conditions you expect to drive in, you can find the tire that will deliver the traction you need.

Tire design and formulation has become very sophisticated. There are fewer compromises in wear, comfort, and performance. You can definitely find a tire that will deliver satisfaction over a range of driving conditions. Now if you live where a tire meeting the severe snow standard is advised, you’ll want to have a set of winter tires during those snowy, icy months.

Let’s go over tire and wheel size. Installing wheels and tires that are the same size as standard is easy. However, many people want to upsize these days and that can get a bit tricky. With the help of your Baltimore tire professional, you will be able to pick the right tire and wheel combination for the way you drive. For example, if you drive in MD off-road areas a lot, a low profile tire might not work because there is just not enough cushion for the bumps and rocks.

You’ll want some help to make sure your new tires and wheels fit without rubbing. Your White Marsh tire pro can also help you know if your engine management computer needs to be reprogrammed so that your speedometer is properly calibrated. A lot of people are tempted to order tires and wheels online but do not realize that some safety systems may be affected. For example, your rolling diameter needs to be within 3% of factory specifications in order for your anti-lock brakes to work properly. Traction and stability control systems can also be adversely affected.

It pays to get professional help when deciding on a wheel size. There has never been a better time to get custom wheels for the look you want. And your tire options are phenomenal. Whether you want a single purpose winter or summer performance tire – or something that can handle a wider range of conditions, you have a tire option for every price range.

You know you need new tires, but you’re not sure what type. You look at a tire to get the size: 225, 50, R, 16, 92, H. All the way to the service center you keep repeating it over and over. You even say it over in your mind while waiting in line. Then you get to the counter and the manager asks what size you need. Then your mind goes blank.

Tire size can be confusing. There’s so much on the side of the tire, and it’s hard to keep straight.

Even though there’s a lot on a tire – if you know what it all means, it’s actually more helpful than confusing. Let’s start with the size number.

For example, let’s say a tire reads: 225 50 R 16 92 H. The 225 part is the width of the tire in millimeters – the width between the sidewalls of an inflated tire with no load. The 50 is the aspect ratio – the ratio of the sidewall height to the tread width. Off-road tires will have a higher number and high performance tires will have a lower number.

The R signifies it’s a radial tire. And 16 is the rim or wheel size in inches.

The 92 is the load rating index – it’s the load carrying capacity of a tire. The higher the number, the more it can safely carry. Your empty vehicle can be safe with a lower number, but you’ll need a higher rating if you routinely haul heavy loads. The next letter is the speed rating. Not all tires are speed rated. The ratings generally follow the alphabet: the further up the alphabet, the higher the speed rating – with the exception of H – it comes between U and V (don’t ask why).

There’s a lot of fine print that you probably need a magnifying glass to read. But there are a couple of other large print items of interest. One is the tread type: highway, mud and snow, all season, severe snow, etc.

And then there’re the Uniform Tire Quality Grading System markings. The first is a tread wear index. 100 is the base line – a lower number is poorer and a higher number is better. All things being equal, a tire rated 200 would wear twice as long, on a government test track, than one rated at 100. These wear grades are only valid within a manufacturer’s product line – you can’t compare with other manufacturers. And it’s important to note that a lower rating might be just what you want – a high performance, sticky tire has a softer rubber compound and won’t wear as long, but boy, will it take those corners.

The next is a traction grade. This measures the tire’s ability to stop on wet pavement in government tests. A – the best, B – intermediate, C – acceptable.

Temperature grade measures a tire’s resistance to heat build up in government tests. A, B and C – from best to acceptable.

It’s safe to go with the original equipment recommendations that came on your car. But if you want to make adjustments, you’ll now be better equipped to communicate with your tire professional.

Most folks around White Marsh have had a flat tire. You know it’s inconvenient and a pain. Our tires are important. Keeping them in good working order isn’t just a big safety issue – it also has a financial impact. With high gas prices, we’ve all heard about the importance of keeping proper tire pressure to save on gas. In addition, proper inflation promotes even tread wear so your tires last longer.

There’s another danger to under-inflated tires. Low tire pressure puts added stress on the structure of the tire itself, causing it to break down prematurely. Also, under-inflated tires generate more heat which also reduces tire life. So get those slow leaks fixed quickly – don’t just keep airing them up every few days. You want to avoid serious tire damage.

Tires can also be damaged by road hazards in and around White Marsh. Punctures, cuts and impacts on curbs or potholes can also cause damage that could lead to tire failure. Sometimes, it’s something that a visual inspection would reveal. Take the opportunity to check your tires when you’re gassing up. Look for slashes, missing chunks, nails or screws in the tread or just uneven wear. Of course check the air pressure too.

Now tire damage can be on the inside where you can’t see it until it’s removed from the wheel. Such damage could come from a severe impact, driving on a flat or even just low pressure. Some punctures can cause internal damage that are too severe to be repaired. You may see our Quicklane Tire & Auto Center @ Al Packer White Marsh professionals take the time to remove your flat from the rim and inspect the inside before repairing it, which means we’re just following good procedure.

Now some tires just can’t be repaired. A puncture may be too large to plug. Also, the puncture could be in a location that’s not safe to repair like in the sidewall or outer portion of the tread. So called run-flat tires should not be repaired because their design is such that internal damage can’t be detected by a visual inspection.

It is also important that repairs should only be done by a qualified tire specialist like the ones we have at Quicklane Tire & Auto Center @ Al Packer White Marsh. You can buy self repair kits – save those for emergencies, like when you’re off-roading and need a quick fix so you can hobble back to civilization and get professional help. If you need to use a repair-in-a-can product, remember it’s a temporary measure only and your tire needs to be properly repaired as soon as possible.

Here are some other considerations: Repairing a flat may void your tire manufacturer’s warranty – just something to keep in mind. Also, if you repair a speed rated tire, you should not use it in any motorsports or operate it above legal speed limits. Your tire professional will repair your tire whenever it’s safe to do so and he’ll advise you when it’s better to replace it. So watch those curbs and keep the air – on the inside.

Quicklane Tire & Auto Center @ Al Packer White Marsh
9801 Pulaski Highway, White Marsh, MD 21220
(443) 777-5050

Everyone in White Marsh MD eventually replaces their tires, whether it’s because they’re worn out or they’re just looking for something different. There are so many great tire choices in White Marsh MD, it can be difficult to sort them out. Let’s group the broad spectrum into several categories that will help in the selection process.

One category is often referred to as “summer tires”. Summer tires are designed to be driven on the road when temperatures are generally above 45 degrees. Their tread design is optimized for traction on dry roads in White Marsh MD and they’re also able to effectively displace water on rainy roads.

Now the rubber compound gets a little hard and stiff as temperatures drop below 45 degrees as it occasionally does here in White Marsh MD. And the tread which handles dry roads so well, can get packed with snow or mud – which provides very little traction in those conditions.

So if you live where its summer all year round, these tires will work well for you. If you like maximum performance in warm weather, but still live where it gets cold and snowy, you’ll want to change your summer tires for winter tires as the weather starts to change.

Summer tires can be purchased with an emphasis on handling performance, smooth ride or long life. Your White Marsh MD tire professional at Quicklane Tire & Auto Center @ Al Packer White Marsh can help you find the right tire for the way you drive.

As you can imagine, winter tires are designed to work very well in snow and ice. Their tread is designed with many channels and grooves that throw the snow out of the tread as the wheel turns. This means the tire is always be able to bite into the snow.

The rubber compound used in winter tires is specially formulated to be flexible at temperatures below 45 degrees. This maximizes cold weather traction. When it gets warmer, the softer rubber will wear faster on warm dry pavement than summer tires, so change them out once the weather has turned.

There’s a range of tires within the winter tire category. If you live where there’s a lot of snow and ice, look for the mountain and snowflake icon that signifies a severe snow rating. If you have milder winters and still want a performance component, they make a winter tire for you as well.

For many people, an all-season tire is the answer. You will give up some of the performance at the extreme ends of the summer tire/ winter tire spectrum, but you will find a long wearing tire that gives both good highway performance and winter traction on our White Marsh MD roads.

Within the all-season category, there are many choices that you tire advisor can help you evaluate.

Quicklane Tire & Auto Center @ Al Packer White Marsh
9801 Pulaski Highway
White Marsh, MD 21220
(443) 777-5050

Outside of these three main categories, some people in White Marsh with trucks and SUVs like a tire that is designed for both on-highway and off-highway use. They can handle the rocks and bumps off-road, but still work well on the street. Again, many options depending on the relative emphasis on on-road verses off-road.

You may want new wheels to go with your new tires – well, there are hundreds and hundreds of styles to choose from. That’s a matter of personal taste. If you want to change the size of your wheels and tires, do get some professional help.

The computers on your vehicle are programmed to the size of wheel and tire combination that comes from the factory. Tire size affects various computer controlled functions like anti-lock brakes, traction and stability controls, speedometer and odometer. Of course, you want these systems to work properly. The computers can be re-programmed for different tire sizes.

And if you want to increase the size of your wheels and tires, you’ll want so help to make sure they’ll fit in the wheel wells of your vehicle without rubbing during turns or over bumps.

Under-inflated tires waste gas for lots of folks in the Dundalk area. Think how hard it is to walk in sand – you just have to work harder because of the resistance. When your tires don’t have enough air in them, their rolling resistance is dramatically increased and it simply takes more gas to get from White Marsh to Dundalk.

Always check your tire pressure when you gas up at one of our local Dundalk service stations. If they’re low – even just a little bit – bring them up to proper pressure. There’s a sticker on the inside of your driver’s door that gives the manufacturer’s recommended tire pressure.

And don’t rely on your tire pressure monitoring system to alert you to when you need more air. The TPMS system is set to warn you when pressure drops twenty percent below recommendations. That’s severely under inflated and you needed more air a long time ago. And if you have a slow leak – get it fixed right away at Quicklane Tire & Auto Center @ Al Packer White Marsh.

Get some air and save some gas.

All new passenger vehicles on our White Marsh MD roads now have tire pressure monitoring systems – TPMS for short. They are designed to alert you if your tires are under inflated. Since they are fairly new, a lot of people have questions about TPMS.

First off, the most important thing is that you still need to check your tire pressure every week – or at least every time you gas up. The TPMS system alert comes in when your tire is twenty percent below the factory recommendation. So if the recommended pressure is thirty five pounds per square inch, the TPMS warning won’t come on until the pressure is at twenty eight pounds. That’s significantly under-inflated. Enough to raise safety concerns.

The worst is tire failure. A severely under inflated tire can overheat and fail. Also, handling degrades to the point that you may not be able to steer out of trouble. Also under-inflated tires wear out faster and they waste fuel. So it’s costly to not stay on top of proper inflation.

What’s the practical value of the TPMS system? Well, it’s twofold. First, it can alert you when your tire is losing pressure due to a puncture or a bent rim. That’s an important warning that you might not have gotten until next time you gassed up.

The second is that we all occasionally forget to check our tire pressure. So it’s a failsafe system to let you know there’s a problem brewing.

Other things can cause your TPMS system to go off. The system also monitors itself. The sensors that are mounted in the wheels have little batteries that send a signal to the monitor. The batteries go dead over time and the TPMS system will let you know. And the sensors could break. Also road salt from our White Marsh MD roads can ruin them.

There’s also a hassle factor that your White Marsh MD tire center has to contend with. For example, when you have your tires rotated in White Marsh, the TPMS system has to be re-calibrated so that it knows which tire is on which corner of the car. Same is true for when you have new tires or winter tires installed. Flat repairs, as well.

That takes extra time. And it requires the right equipment and training. Special – and expensive – tire change machines need to be used with some sensors. It’s all complicated by the fact that there are a number of different TPMS systems in use so the tire professionals at Quicklane Tire & Auto Center @ Al Packer White Marsh need equipment and training for each kind. Tire centers have had to raise the price of some of these basic services to offset their increased costs.

Also if you add custom wheels on your Ford, you need to put in new TPMS sensors if your originals won’t work on the new rims. If you don’t your TPMS light will be on constantly and you won’t have the benefit of the warning system.

All in all, the mandated TPMS systems will save lives, so they’re worth the added hassle and expense.