Local Baltimore roadside emergencies can range from a flat tire downtown to being stranded in a snowy ravine for three days. So you may want to consider a basic emergency kit to keep in the car at all times and a travel kit tailored to a specific trip.
Your close-to-home kit for around White Marsh would have some basic items to work on your car: everything you need to change a tire, gloves, a couple quarts of oil, some antifreeze and water. A can of tire inflator is a great temporary fix for minor flats. You’ll also want jumper cables or a booster box, flares, a flashlight and some basic hand tools.
Now for your comfort and safety: a first aid kit, drinkable water, high calorie food (like energy bars), blankets, toilet paper, cell phone, towel, hat and boots. Keep some change for a pay phone, emergency cash and a credit card.
People who live in areas with frequent severe weather or earthquakes may want to carry provisions for longer emergencies.
For trips away from home, consider the weather and geography as you assemble your emergency supplies. You’ll need to have a source of light and heat and will want to provide protection against the elements as well as adequate food and water for everyone in the car.
Always tell people where you are going and have a plan for checking in at waypoints. Then if you run into trouble, you can be reported missing as soon as possible and rescuers will be able to narrow the search area.
The key to safe travel is to keep your vehicle properly maintained, plan ahead, and let others know your itinerary.
There was a man in Baltimore who learned that most car accidents occur within a mile of home – so he moved. (Just Kidding!)
When we think of defensive driving, we often focus on our local MD highway situations. The fact of the matter is we need to be just as careful close to home in White Marsh, because that’s where we do most of our driving. We can’t let our familiar surroundings keep us from driving defensively.
Defensive driving begins with the proper attitude. Have in mind that you won’t let anyone take your safety away from you. You’ll be aware of your surroundings, road conditions, other vehicles and hazards. And the first person to be concerned with is you: start with your own environment.
Don’t leave without securing all occupants including children and pets. Watch for loose items that can become projectiles during evasive maneuvers.
Driving too fast or too slow increases the chance of an accident.
Never drive impaired: Alcohol is a factor in half of all fatal crashes. Never drink and drive.
Other impairments include being sleepy, angry, daydreaming or talking. If you suddenly wonder how you got where you are – you’re not paying enough attention.
Keep your windows clean and uncluttered. No fuzzy dice and stickers.
Keep your car in good shape so that it handles properly: Maintain tires, lights, brakes, suspension, wheel alignment and steering.
Always use your turn signals while driving around White Marsh MD. Avoid other vehicles’ blind spots.
Don’t drive faster than your headlights – if you can’t stop within the distance you can see, you’re going too fast.
Avoid driving over debris in the road. Even harmless looking items can cause damage or an accident.
Keep your wheels straight when waiting to turn at an White Marsh MD intersection. That way if you’re hit from behind, your car won’t be pushed into on-coming traffic.
My daddy always said that when you drive, you’re actually driving five cars: yours, the one in front, the one behind and the ones on either side. You can’t trust that other drivers will do the right thing, so you’ve got to be aware of what they’re doing at all times.
If you see another car driving erratically, weaving, crossing lanes, etc., stay back. Take the next right turn if you’re downtown White Marsh, or take the next exit on the MD highway. Notify the police if you see someone driving dangerously in our White Marsh community.
Never follow too close. The minimum distance is the two second rule. Pick a landmark ahead, like a tree or road marker. When the car in front of you passes it, start counting: ‘one-one-thousand, two-one-thousand’. If you pass the landmark before reaching two-one-thousand, you’re following too close.
Remember that the two second rule is the minimum – it assumes you’re alert and aware. Three seconds is safer. Move out to five seconds or more if it’s foggy or rainy.
Someone will inevitably move into your forward safety zone – just drop back and keep a safe distance.
If someone follows you too closely, just move over.
Don’t play chicken by contesting your right of way or race to beat someone to a merge. Whoever loses that contest has the potential to lose big and you don’t want any part of that. So stay alert, constantly scan around your car and arrive safely.
Have you ever had an experience like this in White Marsh MD? You drive through the one of those automatic car washes. When you get to the end, where the dryer is blowing, your check engine light started flashing!
You fear the worst, but within a block or two, the light stopped flashing, but stayed on. By the next day, the light was off.
You wonder; “What was going on?” Well, it’s actually a good lesson in how the Check Engine light works.
Your air intake system has a sensor that measures how much air is coming through it. When you went under the high-speed dryer, all that air was blasting past the sensor. Your engine computer was saying, there shouldn’t be that much air when the engine is just idling. Something’s wrong. Whatever’s wrong could cause some serious engine damage.
Warning, warning! It flashes the check engine light, to alert you to take immediate action.
It stopped flashing because once you were out from under the dryer, the airflow returned to normal. Now the engine control computer says the danger is past, but I’m still concerned, I’ll keep this light on for now.
Then the Check Engine Light goes off in a day or two.
The condition never did recur, so the computer says whatever it was, it’s gone now. The danger is past, I’ll turn that light off.
Now a flashing check engine light is serious. You need to get it into our White Marsh MD shop as soon as possible. But if it stops flashing, so you have time to see if the problem will clear itself or if you need to get it checked. How does the computer know when to clear itself?
Think of it this way. The engine control computer is the brain that can make adjustments to manage the engine. Things like alter the air to fuel mix, spark advance, and so on. The computer relies on a series of sensors to get the information it needs to make decisions on what to do.
The computer knows what readings are in a normal range for various conditions. Get out of range, and it logs a trouble code and lights up the check engine warning.
The computer will then try to make adjustments if it can. If the computer can’t compensate for the problem, the check engine light stays on.
The computer logs a trouble code. Some people think the code will tell the technician exactly what’s wrong?
Actually, the code will tell the technician what sensor reading is out of parameters. It can’t really tell you why, because there could be any number of causes.
Let’s say you’re feeling hot. You get your heat sensor out – a thermometer – put it under our tongue and in a minute or two you learn that you have a fever of 104 degrees.
You know your symptom – a fever – but you don’t know what’s causing it. Is it the flu, a sinus infection or appendicitis?
You need more information than just that one sensor reading. But it does give you a place to start and narrows down the possible problems.
There are reports on the internet telling you that you can just go down to an auto parts store and get them to read your trouble code or buy a cheap scan tool to do it yourself.
There are two problems with that. First, the computer stores some trouble codes in short term memory, and some in permanent memory. Each manufacturer’s computer stores generic trouble codes, but they also store codes that are specific to their brand.
A cheap, generic scan tool, like you can buy or that the auto parts store uses, doesn’t have the ability to retrieve long-term storage or manufacturer specific codes. Your White Marsh MD service center has spent a lot of money on high-end scan tools and software to do a deep retrieval of information from your engine control computer.
The second problem is that once you’ve got the information, do you know what to do with it? For example, a very common trouble code comes up when the reading on the oxygen sensor is out of whack.
So the common solution is for the auto parts store to sell you a new oxygen sensor, which are not cheap, and send you off on your way. Now your oxygen sensor may indeed have been bad and needed replacing. But the error code could have come from any of a dozen of other problems.
How do you know the right solution? Back to the fever analogy, do you need surgery or an aspirin? Leave it to the pros at Quicklane Tire & Auto Center @ Al Packer White Marsh. Give us a call at (443) 777-5050 and let us help you resolve your check engine light issue.
